SimpliVity OmniCube CN-2000 - Configuring the Management Network IP Settings

CN-Series Hardware Installation and Maintenance Guide Configuring the Management Network IP Settings
3. Type the VLAN identifier for your network.
4. Press Enter to return to the Configure Management Network screen.
Related Topics
Task 5—Configuring IPMI for Remote Management on page 27
Connecting to IPMI and Launching the Virtual Console on page 30
Accessing VMware ESXi Through the IPMI Virtual Console on page 33
Configuring the Management Network IP Settings
Before You Begin
• You have configured IPMI and launched the Virtual Console.
• You have logged in to VMware ESXi.
To configure the IPsettings for the management network:
1. Select IP Configuration in the Configure Management Network screen.
2. Press Enter to display the IP Configuration screen.
3. Select Set Static IP address and network configuration.
36