Viewing events or alarms in the vSphere Client 40
Drive Monitoring 40
Viewing Drive Status in the vSphere Client 41
Power Supply Monitoring 42
Viewing Power Supply Status in the vSphere Client 42
Accelerator Card Monitoring 43
Viewing Accelerator Card Status in the vSphere Client 44
Accelerator Card is Not Detected 44
Reverting an Accelerator Card to its Backup Firmware 45
Network Interface Monitoring 45
Viewing Network Interface Status in the vSphere Client 46
Ports Required for Network Communication 46
5 - Drive Maintenance 49
Guidelines for Maintaining Drives 49
Removing a Drive 50
Installing a Drive 51
6 - Power Supply Maintenance 53
Guidelines for Maintaining Power Supplies 53
Removing a Power Supply 53
Installing a Power Supply 54
Appendix A - Network Configuration Options 57
10GbE-Only Network Configuration 57
Direct-Connected Storage Network Configuration 58
Switch-Connected Storage Network Configuration 59
Index 61
4
CN-Series Hardware Installation and Maintenance Guide
To Next Page
Loading...
