2 Safety
6 Minilab man-CH-PVF-C-V17-2
AUTOMATED VERTICAL MOVEMENT
(STC #998-4728)
This label is located on the right service door next to the handle.
After power interruption, an automatic restart may occur. In this case,
the piston will move upward. Follow Lockout and Tagout procedures
before servicing.
ELECTRICAL POWER 230V
(STC #998-4732)
This label is located on the back side of the panel enclosure next to
the power connection inlet.
With the socket outlet connection removed, the electrical power
supply and electrical terminals are exposed. A hazardous voltage up
to 230V is present, can cause electric shock or burn and will result in
serious injury. Follow Lockout and Tagout procedures before
servicing.
To Next Page
Loading...
