Simrad AP50 Autopilot
40 20222410 / B
Priority steering by S9 Steering Lever
The illustration shows one example of arranging an override
steering function by the S9 Steering Lever when connected to
JD53 Distribution Unit.
Figure 2-37 Priority steering by S9
Notes ! 1. Make sure the S9 is within the rated specifications for the
valves.
2. S4-S7 on the Solid State Board must be set for NFU priority.
See
Figure 2-16.
When the S9 handle is pulled out, the autopilot will be
disengaged. The Solid State PCB is disconnected and the valves
are operated only from the S9. When the S9 handle is pushed in,
the autopilot will resume in AUTO mode on the present
heading.
2.14 R3000X Remote Control
The R3000X Remote Control is weather proof and can be
mounted outdoors in the supplied bracket that is fixed by four
mounting screws.
To Next Page
Loading...
