Simrad GO XSE Series Installation Manual

Ú
Note: CZone Config also needs to have the GO XSE set as a
controller.
Naviop
If this device is on the same NMEA 2000 network as a Naviop Loop
system, this device can be used to operate the Naviop Loop system.
For details, refer to the documentation following the Naviop system.
Mercury
If the unit is on the same NMEA 2000 network as a compatible
Mercury Marine VesselView product or VesselView Link, specific
features are automatically unlocked on the unit. When the features
are enabled, the display may prompt the user for some basic
configuration information. Refer to the VesselView manual or engine
supplier for further information.
Suzuki Marine
If this device is on the same NMEA 2000 network as a compatible
Suzuki product or a compatible gateway, a dedicated Suzuki
instrument panel is unlocked and automatically enabled. Data
source selection is done the same way as for any regular NMEA
2000 sources.
Yamaha
If a compatible Yamaha gateway is connected to the NMEA 2000
network, a Yamaha engine icon is added to the Home page.
For more information about configuration information, the Yamaha
panel and the data displayed, and Troll control, refer to the Yamaha
manual or the engine supplier.
Evinrude
If an Evinrude engine control head is available on the NMEA 2000
network, the Evinrude engines can be monitored and controlled
from the unit. When the feature is available, an Evinrude icon is
added to the home page.
A maximum of two control heads and four engines is supported.
3rd party support | GO XSE/XSR Installation Manual
57

Simrad GO XSE Series Specifications

General

Brand	Simrad
Model	GO XSE Series
Category	Marine Equipment
Language	English