Icon Tuner VHF Playback
Select to power on/off the active source. This button location is
dependent on your unit's size. It is on the main Audio controller
panel on larger units, and on the Audio controller's source panel on
smaller units.
Select to display options for setting up zones and master control
Select to display the
favorite stations for
the tuner
Select to display the
favorite channels for
the VHF
Select to display the
Device explorer. Use
the explorer to
access the source’s
native controller or
file structure and to
select tracks.
Select to display optional settings for active source
Setting up the audio system
Audio mixer
Use the Mixer to:
• Adjust the balance, volume, and volume limits individually for each zone.
• Adjust the bass and treble, and the balance between zones.
• Turn on or off individual speaker zones in the Master control.
The Mixer options vary depending on the activated audio device. The following is an
example of the USB source mixer option for the All Zones:
• Bass
• Middle
• Treble
The speakers
Speaker zones
The NSO evo3 can be set up to control different audio zones. The number of zones depends
on the audio server connected to your system.
You can adjust balance, volume and volume limit settings individually for each zone.
Adjustments to the bass and tremble settings will alter all zones.
Master volume control
By default the volume for all speaker zones are adjusted when you adjust the volume. You
can define which zones will be altered when you increase/decrease the volume.
Selecting tuner region
Before playing FM or AM radio, and using a VHF radio, you must select the appropriate region
for your location.
Favorite channels
When a tuner or VHF channel is tuned in, you can add the channel to your favorite list. The
favorite channels can be viewed, selected and deleted from within the Favorite list.
You page through favorite channels by using the up/down Audio controller buttons.
Audio| NSO evo3 Operator Manual
113
To Next Page
Loading...
