Displaying source data in the cursor window
Selecting a point in a trail displays the cursor position window. If recorded source data exists
for the point selected, the value is shown in the window in addition to the other cursor
information.
The system records data according to your settings in the edit Trail dialog. Source data points
are recorded when there is a change in the course or heading.
Cursor position window showing no SOG value Cursor position window showing SOG value
Waypoints, Routes, and Tracks dialogs
The Waypoints, Routes, and Tracks dialogs give access to advanced edit functions and
settings for these items.
The dialogs are accessed by selecting the Waypoints button on the Tools panel on the
Home page.
46
Waypoints, Routes, and Tracks | NSO evo3 Operator Manual
To Next Page
Loading...
