Icon Definition
The system is simulating. Turn ON/OFF the simulator from the simulator
settings dialog.
Radar is paused. If you want the radar to transmit, select the transmit
option in the Radar page menu.
Radar is transmitting. If you want to pause the radar, select the pause
option in the Radar page menu.
An OP40 remote controller is connected to the unit
An ZC1 remote controller is connected to the unit
An OP50 or ZC2 remote controller is connected to the unit
The system is synchronizing data during startup.
File transfer problem, caused by an interruption in the internet
communication.
Trip recording. For more information, open the TripIntel tool option.
Uploading files, e.g.: service report, C-MAP genesis, route files to
PredictWind, etc.
138
Appendix| NSO evo3 Operator Manual
To Next Page
Loading...
