button displays engine and vessel data, selecting the Vessel Control button displays engine
controls associated with VesselView.
When the features are enabled, the display may prompt the user for some basic
configuration information.
For more information about configuration information, the Mercury application page, the
Mercury engine and vessel data displayed, and the Vessel Control controller, refer to the
VesselView manual or engine supplier.
Suzuki Engine panel
If a Suzuki engine adapter is available on the NMEA 2000 network, a Suzuki engine icon is
added to the Home page. An icon is also added to the Page editor. You can select to display
the Suzuki engine panel as a full page panel or as part of a multi-panel page.
The layout and content of the engine panel depends on selected panel size. The digital
gauges can be customized, refer to "Customizing the panel" on page 110.
Yamaha engine integration
If a compatible Yamaha gateway is connected to the NMEA 2000 network, a Yamaha engine
icon is added to the Home page. An icon is also added to the Page editor. You can select to
display the Yamaha engine panel as a full page panel or as part of a multi-panel page. The
layout and content of the engine panel depends on the panel size.
If the Yamaha system supports Troll Control, a Troll button is added to the Control Bar. Select
this button to enable/disable troll control and control the trolling speed.
For more information about configuration information, the Yamaha panel and the data
displayed, and Troll control, refer to the Yamaha manual or the engine supplier.
FUSION-Link integration
FUSION-Link devices connected to the NMEA 2000 network can be controlled from the NSO
evo3 system.
The FUSION-Link devices appear as additional sources when using the audio function. No
additional icons are available.
Refer to "Audio" on page 111 for more information.
FLIR camera integration
If a compatible FLIR M-series camera is available on the Ethernet network, you can display the
video and control the camera from the NSO evo3.
The FLIR camera is controlled from the Video panel, and no additional icons appear on the
Home page.
Refer to "Video" on page 122 for more information.
BEP CZone integration
The unit integrates with BEP’s CZone system used for controlling and monitoring a
distributed power system on your vessel.
The CZone icon is available in the Tools panel on the Home page when a CZone system is
available on the network.
A separate manual is provided with your CZone system. Refer to this documentation and to
the unit's Installation manual for how to install and configure the CZone system.
CZone dashboard
When the CZone is installed and configured, an additional CZone dashboard is added to the
Instruments panels.
14
Introduction | NSO evo3 Operator Manual
To Next Page
Loading...
Need help?
General
