Reset radar to factory defaults
Clears all user and installer settings applied to radar, and restores ex-factory settings. Use with
caution, taking note of current settings first, especially those set by the operator if radar has
already been in active service.
Radar palettes
Different palettes are available for the radar video and for the target trails.
¼
Note: The palette color does only affect day colors. Night colors are automatically
selected when the brilliance are adjusted to 80% or lower.
View from left
¼
Note: This option is available for the R2009 control unit only.
Used for optimizing the display for viewing from the left. See "Viewing angle" on page 37.
56
Software setup | R2009/R3016 User manual
To Next Page
Loading...
