Singer 5050 - Slraighl Slilching; Straight Stitching; Slilch Widlh Seleclor; Needle Position Seleclor

Straight stitching
Stitch width selector
Before vou move the selectors to set your
machine for straight stiching, turn the hand
wheel toward vou until needle isat its highest
point.
Straight stitching
can be performed with
pattern selector in any position; stitch width
lever mustbe setat (
! )only.
Needle position
selector
Needle Position Selectorpositionsthe needle in
left (
J. ), center ( .i. )or right ( .l )
needlepositions.
Stitch lenght selector
To adjust the lenght of your stitches, turn the
dial
50 that desired stitch length is positioned
under ( • )symbol.
•
To shorten stitch lenght, turn dial toward a
lowernumber.
•
To lengthen stitch length, turn dial toward a
higher number.
32