6 Foot switch Sirona Dental Systems GmbH
6.3 Selecting the chair program Operating Instructions C4
+
59 06 313 D 3382
26 D 3382.201.01.13.02
Automatic cursor control with C foot switch
A yellow diode on the dentist element indicates the posi-
tion of the cursor. The cursor path is marked by lines.
1. After you switch on the system, or when the chair
has reached the entry/exit position 0, the cursor is
between the chair program keys 1 and 2.
2. When you pick up an instrument or activate any of
the instruments, the cursor jumps to a position be-
tween the spray and chip blower keys in the first in-
strument block.
If the cursor is in the quick setting key column at the
very left, it also jumps to a position between the
spray and chip blower keys in the instrument block
when you swing the foot switch to the right (D).
3. After you have placed the instrument in its holder,
the cursor jumps back to its position between the
chair program keys S and 0.
6.3 Selecting the chair program
Activate the desired chair program 1 or 2. The chair
moves to the programmed treatment position.
Move the dentist element by hand to the desired treat-
ment position. Use the handle (1) on the dentist element
to do this.
The dentist element can be fixed by the service engineer
at a height which is convenient for you.
3.
2.
1.
1
To Next Page
Loading...
