7 Program selection Sirona Dental Systems GmbH
7.2 Program selection Operating Instructions C4
+
59 06 313 D 3382
28 D 3382.201.01.13.02
7.2 Program selection
Keys for selecting the programmed patient positions.
With swivelable cuspidor:
Before the chair moves to the selected program position,
the swiveled-in cuspidor automatically returns to its
starting position.
Factory settings:
The operation light switches OFF automatically before
the chair moves to the entry/exit position 0 or the mouth
rinsing position S.
The operation light switches ON automatically after the
chair has reached patient position 1 or 2.
Changing the factory settings:
When programming the patient positions you can preset
whether the operation light should switch OFF or ON in
the different chair programs 0, S, 1 or 2 (see page 36).
Program key 0
Intended for the entry/exit position.
Program key S with memory function.
In the S program, you can program the tumbler filling
and / or the cuspidor flushing functions (see Mode dia-
log 11.9 and 11.10).
When you press this key a second time, the treatment
center returns to its previous position (memory function).
Example: You have programmed this key for the mouth
rinsing position. When you press this key, the treatment
center moves to the programmed position.
Memory function: When you press this key a second
time, the treatment center returns to its previous posi-
tion.
00
SS
22
11
00
SS
To Next Page
Loading...
