Sirona C4+ - Mode Dialog Settings; Mode Key and Basic Settings; User Management and Maintenance Settings

Sirona Dental Systems GmbH 11 Basic treatment center settings in the Mode dialog
Operating Instructions C4
+
11.1 Mode key
59 06 313 D 3382
D 3382.201.01.13.02
57
11 Basic treatment center settings in the
Mode dialog
11.1 Mode key
When you press the Mode key, you can access and
change various basic treatment center settings in a cer-
tain order.
They usually apply both to user A and B.
The corresponding display disappears automatically
after approx. 10 seconds. To exit the Mode dialog more
quickly, press the Mode key for > 3 seconds.
The flashing text is selected and saved when you exit the
Mode dialog.
You can select the desired setting by pressing the
– or
+ key.
Key lock
The key lock can be activated and deactivated again by
pressing the - and + keys simultaneously.
The key lock affects the entire control panel of the dentist
element
NOTICE
i
The key lock can be deactivated only as described abo-
ve. Switching the treatment center off and on again has
no effect on this state.
11.2 Mode: NACL PUMP OFF or ON for instrument holder ..
Saline solution for the desired burr instrument
or the SIROSONIC L scaler (instrument holder
2 − 5)
Here you can assign the NaCl pump to a certain instru-
ment using the
– / + keys.
For preparation of the NaCl pump, see page 45 .
NOTICE
i
NACL appears on the display in the instrument dialog of
the instrument to which the NaCl pump has been as-
signed.
NOTICE
i
If you want to assign the NaCl pump to the SIROSONIC L
scaler, always select holder 5, regardless of the scaler’s
position in the instrument rack.
A
NACL – PUMP
OFF
NACL – PUMP
OFF
A
NACL – PUMP
ON FOR HANGER 2
NACL – PUMP
ON FOR HANGER 2