Crush hazard
Do not let any object or person come in contact with the push
and / or protection tube on front and rear attachment.
Risk of damage to the linear actuator caused by static and
dynamic overloading of the actuator. Do not use the actuator
beyond the permissible operating data
WARNING
Pinch hazard
When the actuator runs into fixed objects, the driving force can
cause personal injury. If the actuator is left unattended, check
that the full stroke length is free of obstacles and that there is
nobody in the stroke area. Alternatively, provide a means of
disconnecting all conductors from the mains power supply.
WARNING
Injury due to cracks and related openings in the housing
of the actuator and / or its accessories:
If the housing is damaged due to stock, beakage or heavy wear,
cease using the device and follow the dismantling instructions.
WARNING
Any side-acting forces can destroy the actuator and pose a risk
of serious injury. During the stroke, do not manipulate any of the
elements connected to the actuator.
WARNING
Danger of injury caused by moving components
Rotating and/or linearly moving components can cause severe
injury.
Therefore:
•
Do not work on or place any of your body, hands, or arms near
moving components
WARNING
Moving components
12
To Next Page
Loading...
Need help?
General
