Proceed as follows in conjunction with visible exterior transport
damage:
• Do not accept delivery or do so only with reservations.
• Record scope of damage on the transport documents or on the
bill of delivery of the shipping company.
• Initiate complaint.
!
Note!
Report any damage as soon as it has been recognized.
Damage claims can only be asserted within the transporter’s
applicable complaint period.
5.3 Return transportation to the
manufacturer
Proceed as follows for the return transport:
1 Dismantle the device if necessary († Chapter Dismantling).
2 Pack device in its original packaging. Follow storage conditions
(† Chapter Storage).
3 Send to manufacturer. The address is listed on the cover back.
5.4 Packaging
For packaging
The individual packaged pieces have been packaged appropriately
according to the expected transport conditions. Only environmentally-
friendly materials were used for the packaging.
The packaging is supposed to protect the individual components
from damage caused by the transport, corrosion and other damage
until they are ready for installation. Therefore, do not destroy the
packaging and only remove it shortly prior to the installation. Keep
packaging for possible return shipment to the manufacturer
(† Chapter 5.3).
If the packaging is to be disposed off, please note and adhere to
the following:
Environmental damage due to incorrect disposal
Packaging material consists of valuable raw materials and in
many cases they can be sensibly recycled and reused.
Therefore:
• Dispose of packaging material in an environmentally correct
way.
• Comply with locally applicable disposal regulations.
CAUTION
Handling of packaging materials
36
To Next Page
Loading...
Need help?
General
