P ersonnel
• The dismantling may only be carried out by specifically qualified
personnel.
• Work on the electric system may only be performed by profes-
sional electricians.
Electric shock and moving parts hazards
Serious injury or death can be caused by touching live electrical
components and by unexpected movement of the actuator.
Be sure power supply is off and actuator is locked out before
installing.
DANGER
Risk of injury due to incorrect dismantling
Stored residual power, sharp-edged components, pins and cor-
ners on the individual components or at the required tools can
cause serious injuries.
Therefore:
• Ensure there is ample of space for the dismantling prior to
starting with the work.
• Use caution when working with open, sharp-edged structural
components.
• Ensure order and cleanliness at the dismantling site! Loosely
stacked structural components or structural components and
tools on the floor may present a source for accidents.
• Dismantle structural components professionally pursuant to
applicable local regulations.
• Secure structural components in a way so they would not be
able to fall or tip over.
• Contact the manufacturer if you have any questions or
concerns.
WARNING
10 Dismantling
Electrical equipment
Basic Information
82
To Next Page
Loading...
Need help?
General
