5.1 Safety information for the
transport
5.2 Transport inspection
The Matrix linear actuator is delivered as one packaged unit in a box
or on pallets.
Check the delivery for completeness and damage due to transport
immediately upon receipt.
C heck completeness of delivery:
• A complete actuator unit.
If cracks in the plastic casing were caused during the transport,
the protection of accordance with IPX6S (squirt water) can no
longer be guaranteed. The actuator must be sent back to the
manufacturer.
• Installed cable and a low-voltage plug (depending on the version
with jack or DIN-8 plug) for the MAX1 and MAX3 line.
• The storage inserts for hinge head and fork head.
• Accessories (optional).
Damage due to improper transport
Significant material damage can occur in conjunction with
improper transport.
Therefore:
• Proceed carefully during the unloading of the packaged items,
during the delivery as well as during the transport to its final
destination and comply with the symbols and information
shown on the packaging.
• Only remove the actuator from its packaging right before
installation.
• Note storage requirements for return transport to the manu-
facturer († Chapter “Storage”).
CAUTION
5 Transport, packaging and
storage
Improper transport
35
To Next Page
Loading...
Need help?
General
