SKF Matrix Series - 7.2 Turn on; 7.3 Turn off

7.2 Turn on
!
Note!
The device does not feature its own operating control ele-
ments. The operation takes place via a separate operating ele-
ment († Separate operating manual).
7.3 Turn off
!
Note!
The device does not feature its own operating elements.
The operation takes place via a separate operating element
(† Separate operating manual).
Actuator may be damaged if liquids penetrate the actuator
during extension and retra c t i o n . K e ep liquids away.
CAUTION
Material damage through overheating
An overheating of the device can cause damage.
Therefore:
• Only use control integrated thermal switch.
• Never exceed nominal load.
• Always adhere to idle times and operating times.
(† Chapter “Technical Data”).
CAUTION
60