2.7 Modifications on the device
To avoid hazardous situations and to ensure optimal performance,
do not make any changes or modifications to the device unless they
have been specifically authorized by SKF.
2.7.1 Warning labels
The following symbols and information decals can be found in the
danger zone. They refer to the immediate vicinity around their
location.
Do not hold on to the device.
(part number 0120698)
The label will be attached for specific applications, e.g. for patient
lifters.
Do not hold on to the actuator or casing tube.
Do not put body parts and objects inbetween moving parts.
Keep body parts or objects away from moving parts.
Adhere to operation instructions and warnings.
Fig. 2
Danger of injury because of illegible symbols
Over the course of time stickers and decals may become dirty or
illegible for some other reason.
Therefore:
• Keep any safety, warning and operation related decals in
legible condition at all times.
• Replace damaged decals or stickers immediately.
WARNING
15
To Next Page
Loading...
