A f ter rescue measures
7.6 Disengagement in case
of emergency
In hazardous situations, all movements of the device must be
stopped as quickly as possible and the power supply must be
turned off.
Proceed as follows in hazardous situations:
1 Immediately engage emergency shut-off, if present, or cut off
power for actuator († Chapter “Shut down MAX1 and MAX3“,
“Shut down MAX6“).
2 Evacuate people from the hazard zone, initiate first aid measures.
3 Notify doctor and fire department, if necessary.
4 Notify responsible person on-site.
5 Keep access paths open for rescue vehicles.Order specialized staff
to repair malfunction.
6 Based on severity of emergency, notify the authorities
if necessary.
7 Order specialized staff to repair malfunction.
8 Check the device and application that uses the device prior to
restarting the operation and ensure that all safety equipment is
installed and fully functional.
Do not restart until all persons are outside the hazard zone.
Check the device and application that uses the device prior to
restarting the operation and ensure that all safety equipment is
installed and fully functional
WARNING
67
To Next Page
Loading...
Need help?
General
