EasyManuals Logo

SKF Matrix Series User Manual

SKF Matrix Series
88 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
2.1.2 Unintended use
Any use other that the intended use, or modifications to the device
without the manufacturer’s written agreement, or operation beyond
the technical limits, is considered unauthorized.
Specific application exemptions are:
Flammable anaesthetic mixture with air
Flammable anaesthetic mixture with oxygen or nitrous oxide
Increased radiation
2.1.3 Essential performance
the essential performance of the linear actuator MAX is moving or
holding a load within the boundaries defined by the device specifica-
tions given in this operating manual and the datasheet.
Any injury, damage or loss caused by violation of these instructions
will be the responsibility of the customer.
2.2 Responsibility of the owner
and processor
The device is designed for personal use and is also used in
commercial applications by owner or processors.
The processor is the contracting partner of the reseller or the
manufacturer. The processor installs the device in a complete system
(application).
The owner or processor of the system is therefore subject to the
requirements of the Occupational Health and Safety Act.
In addition to the safety instructions in this Manual, the owner or
processor must do the following concerning these safety and acci-
dent prevention guidelines and environmental protection regula-
tions, applicable to the site of the systems installation:
Inform themselves of applicable industrial safety regulations and
determine additional hazards that arise due to the specific work-
ing conditions prevailing at the site where the device is installed
using risk assessment. The risk assessment must be implemented
in the form of work instructions for device operation.
Must confirm that the work instructions created for the system
including the device satisfy current legal requirements and must
alter the instructions if they don’t.
Clearly regulate and specify the responsibilities for installation,
operation, maintenance, and cleaning.
Ensure that all employees who deal with the device have read and
understood this Manual.
Provide personnel with the required protective equipment.
In addition, owner must train personnel at regular intervals and
inform personnel of the hazards.
!
Note!
Any unauthorized use of the device can cause personal
injury and property damage. Always adhere to the instructions
given in this manual.
9

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the SKF Matrix Series and is the answer not in the manual?

SKF Matrix Series Specifications

General IconGeneral
BrandSKF
ModelMatrix Series
CategoryController
LanguageEnglish

Related product manuals