SKF Matrix Series - Page 66

4 Turn button (1) by 90° again and unlock
Adjust speed of the lowering device.
1 The speed of the lowering device may be adjusted via two oppos-
ing adjusting screws (1).
1
Fig. 51
Adjust actuator with Bowden cable
For adjustments via the Bowden cable, the Bowden cable (1) is
operated via an operating element on the application.
1
Fig. 52
Material damage
The adjusting screws are not secured and can be entirely
unscrewed and can therefore be lost.
Therefore:
• Do not completely unscrew adjusting screws.
CAUTION
66