SKF Matrix Series - Page 65

2 Ensure that the head (1) is in position (2).
3 Manually retract actuator (3).
1
2
3
Fig. 50
Risk of crashing and material damage due to an unintended
lowering
Depending on the construction and the load, the linear actuator
can be quickly retracted. Unintended lowering while carrying a
load may cause injuries and material damage
Therefore:
• The part of the application that is to be lowered (e. g. head
and foot piece in a bed) must be retained at all cost during the
lowering.
• In its retracted position of the application, the portion that is
to be lowered must rest on a solid arrester (e. g. bed frame).
CAUTION
65