2 Sealing ring (arrow) with Klübersynth VR 69-252
(part no. 0118037) lightly apply grease.
3 Insert jack plug with bayonet joint (1) into the connecting sockets
(2) of the device († fig. 41).
Ensure correct positioning of the groove (3) († fig. 42).
Fig. 42
!
Note!
Damaged sealing rings and twisted plugs can no longer
guarantee protection pursuant to IPX6S. They have to be
replaced by the manufacturer (†
Chapter “Transport Inspection
).
Damage due to wrong lubricants
The use of incorrect additives may cause significant material
damage.
Therefore:
• Only use the auxiliary products listed by the manufacturer.
CAUTION
57