SKF Matrix Series - Page 63

To engage the emergency lowering device, proceed as follows:
1 Open release handle (1).
2 Turn actuator (2) clockwise toward the arrow. The actuator moves
downward. The required manually applied force depends on the
load.
2
Fig. 47
Fig. 46
1
Risk of crashing and material damage due to an unintended
lowering
Unintended lowering while carrying a load may cause injuries
and material damage.
Therefore:
• Immediately stop the operation in the event of excessive exer-
tion of force or independent lowering and initiate repairs
through the manufacturer.
CAUTION
63