B ehavior during malfunctions
In principle:
1 In the event of a malfunction that may present an immediate
danger to persons or assets, turn off the actuator or control unit
immediately and safeguard against a restart.
2 Determine cause of malfunction.
3 Depending on the type of a malfunction, have it repaired by quali-
fied personnel.
4 Inform responsible party on-site concerning malfunction.
!
Note!
The following malfunction table provides information
as to who is authorized to perform the repair.
Risk of injury and material damage due to incorrect repair
of malfunction
The Matrix linear actuator is not designed for repair work.
Incorrect repair of a malfunction may lead to personal injury
or material damage.
Therefore:
• Never loosen the screws on the linear actuator or try to open
the linear actuator.
• In the event of a malfunction that cannot be fixed by adhering
to the subsequent notices, dismantle the device and send it to
the manufacturer for repair. († Chapter “Transport, Packag-
ing and Storage”).
DANGER
Incorrect repair of malfunction
78
To Next Page
Loading...
Need help?
General
