56
10. Cleaning
10.1 Basics
Cleaning should be carried out in accordance with the operator's
own company rules, and cleaning agents and devices and the
personal protective equipment to be used should likewise be
selected in accordance with those rules. Only cleaning agents
compatible with the materials may be used for cleaning.
Completely remove any cleaning agent residue left on the
product and rinse with clear water. Unauthorized persons must
be kept away. Use signage to indicate wet areas.
10.2 Interior cleaning
The interior normally does not need to be cleaned. The interior
of the product must be cleaned if incorrect or contaminated
lubricant accidentally enters the product. Please contact our
Service department.
10.3 Exterior cleaning
Do not allow any cleaning fluid to enter the interior of the
product during cleaning.
Risk of fatal electric shock
Cleaning work may only be performed on
products that have
been de-
energized first. When
cleaning electrical components, be mindful of the
IP enclosure rating.
Serious injury from contact with or inhalation
of hazardou
s substances
Wear personal protective equipment. Observe the
safety data sheet (SDS) of the hazardous
substance.
Avoid contaminating other objects or
the environment during cleaning.
If products have ultrasonic sensors, the active sensor surface
must be cleaned with a cloth when it becomes contaminated.
To Next Page
Loading...
Need help?
General
