SKF MKU Series - Assembly Drawing with Minimum Mounting Dimensions; MKU;MKF Gear Pump Units with 2-Liter Plastic Reservoir for Oil and Fluid Grease

26
6.4 Assembly drawing with minimum mounting dimensions
6.4.1 MKU/MKF gear pump units with 2-liter plastic reservoir for oil and fluid grease
Fig. 20
MKU/MKF gear pump units with 2-liter plastic reservoir for oil and fluid grease
Legend to Figure 20:
A Width
B Height (clearance for lid removal)
C Depth
X Assembly holes
Minimum mounting dimensions:
A 350 mm
B 380 mm
C 140 mm
Recommended fastening hardware:
• Hexagon head bolts (2x) acc. to ISO 4017-M8x25-8.8
• Hexagon nuts (2x) acc. to ISO 4032-M8-8
• Washers (4x) acc. to ISO 7090-8-200-HV
Tightening torque: 25 Nm