Section 04 ENGINE
Subsection 10 (REWIND STARTER)
04-10-5
All Engines Except 583 MX Z,
583 Summit and 670
Reinstall rewind starter assembly on engine.
583 MX Z, 583 Summit and 670 Only
Install rewind starter on damper ring matching
notches and embosses.
1. Notch
Prior to installing starter grip
no. 15
on new rope,
it is first necessary to fuse the rope end with a lit
match. Pass rope through starter grip and tie a
knot in the rope end. Fuse the knot with a lit
match then insert rope end down and pull the
starter grip over the knot.
TYPICAL
A03C0VA
A01C56A
1
A01C18A
To Next Page
Loading...
