Section 05 TRANSMISSION
Subsection 08 (GEARBOX)
05-08-12
READY TO INSTALL BEARINGS, SHIMS, CIRCLIPS AND PLUGS
INSTALLATION
Reverse removal procedure. Check pulley align-
ment.
OIL LEVEL
To check, pull dipstick. Oil should reach level
mark.
NOTE:
After first outing, oil level will decrease as
the upper oil cavity fills with oil. Recheck oil level
and refill as required.
1. Full level mark
2. Lower level mark
To fill, remove filler plug from top of transmission.
Refill as required using BOMBARDIER SYNTHETIC
CHAINCASE OIL (P/N 413 8028 00 — 12 x 250 mL).
A29D1OA
A29D0IA
1
2
To Next Page