Ski-Doo Summit 583 1998 - Inspection of Heating Elements

Section 06 ELECTRICAL
Subsection 06 (TESTING PROCEDURE)
06-06-16
INSPECTION OF HEATING ELEMENTS
All Models Except Skandic WT/SWT/WT LC
All measurements must be performed at 21°C
(70°F).
Throttle Lever Heating Element
Resistance Measurement
Current Measurement
Handlebar Grip Heating Element
Resistance Measurement
Skandic WT/SWT/WT LC
Throttle Lever Heating Element
Resistance Measurement
Handlebar Grip Heating Element
Resistance Measurement
➀
When measuring resistance at terminals the
actual value will be half the measurement in
table. The reason for that is the elements are
connected in parallel. Therefore the total resis-
tance is half the resistance of one element.
HIGH
INTENSITY
YELLOW
/
BLACK wire
BROWN wire
1.96 to
3.64 ohms
LOW
INTENSITY
YELLOW
/
BLACK wire
BROWN
/
YELLOW wire
8.05 to
14.95 ohms
HIGH
INTENSITY
BROWN wire
0.23 A
minimum
LOW
INTENSITY
BROWN
/
YELLOW wire
0.13 A
minimum
HIGH
INTENSITY
YELLOW
/
BLACK wire
ORANGE wire
8.73 to
➀
10.67 ohms
LOW
INTENSITY
YELLOW
/
BLACK wire
ORANGE
/
VIOLET wire
17.7 to
➀
20.7 ohms
BLACK wire
BLACK wire
48 ohms
BLACK wire
BLACK wire
9.6 ohms
➀