Ski-Doo Summit 583 1998 - Page 31

Section 01 TOOLS AND PRODUCTS
Subsection 01 (SERVICE TOOLS)
01-01-12
SUSPENSION (continued) — RECOMMENDED SERVICE TOOLS
Track cleat remover
(P/N 529 0287 00)
A01F224
APPLICATION
All models.
Camber angle tool
(P/N 529 0216 00)
NOTE:
Angle finder with a mag-
netic base must be used.
Suggestion: K-D tool no. 2968
A06B024
APPLICATION
All DSA front suspensions.
254
343
Track tension gauge
(P/N 529 0215 00)
A00B3X4
APPLICATION
All models.
Track cleat installer
(Narrow)
(P/N 529 0085 00)
A01B1M4
APPLICATION
All models.
342
347
Drill bit
(P/N 529 0318 00)
A01B564
APPLICATION
All 3/16 inch rivets.
Spring installer (bar)
(P/N 529 0050 00)
A00C1I4
APPLICATION
All SC-10 suspensions.
Drive axle holder
(P/N 529 0072 00)
A01B1E4
APPLICATION
All models.
508
326
333