9
SKOPE Reflex Underbench Fridge and Freezer
Installation
Service Manual
Cleaning Before First Use
Clean and thoroughly sanitise the cabinet interior and food contact surfaces, such as the
worktop, before first use. Unplug the cabinet from the power supply before cleaning, and use
only standard stainless steel cleaners suitable for food preparation areas. Clean the outside of
the cabinet as instructed in the cleaning section of this service manual (see “Cabinet” on
page 57).
Drawers
Where fitted, remove the drawers when cleaning. Pull the drawer out of the cabinet, release
latches at side of drawer as shown, and lift the drawer out at an angle. You can also remove
the drawer slider by releasing the side catches as shown. Reverse the procedure to refit
drawers in the cabinet after cleaning.
Shelves
Each shelf is held in place with four shelf clips, which clip into the shelf support strips, or on
shelf feet on the cabinet floor. The shelf clips may be positioned at different heights to suit
various product.
Power Cord
Before final positioning of the cabinet, pull the power cord out and connect to the power supply.
To Next Page
Loading...
