Slican IPM-032
1 Basic parameters and features of the Slican IPM-
032 telecommunication server
1.1 General
The Slican IPM-032 telecommunication server is intended for small and medium companies. It is
available as a wall-mounted (WM) version or for installation in 19" racks (2U).
1.2 Functional features
ξ
VoIP functionality available in basic configuration,
ξ
scalable, modular construction,
ξ
remote management using a PC via LAN, Internet or modem (optional),
ξ
LCR – intelligent routing of outgoing calls to optimise costs, reliability, networking,
ξ
monitoring operating parameters in real time, from inside the managing application,
ξ
dedicated digital system and VoIP system Slican phones,
ξ
option to configure system phones from inside the application managing the server,
ξ
managing the costs of calls and call tariffs by using the internal server mechanisms and an
additional application – BillingMAN,
ξ
99 voice announcements (DISA/infolines or a DND message),
ξ
subscriber services confirmed with voice messages,
ξ
operates with PC applications.
1.3 Support and terminals
ξ
analogue ports of extension phones with pulse dialling and DTMF,
ξ
full functionality for phones with DTMF,
ξ
internal CLIP signalling and transfer of public signals,
ξ
configurable ISDN ports at BRA 2B+D terminal (int./ext.),
ξ
Connectors:
- ISDN 2B+D – DSS1 protocol (EURO – ISDN), MSN and DDI
- ISDN 30B+D – DSS1 protocol (EURO – ISDN), DDI
- public analogue lines (POTS), according to ASS signalling,
- GSM – Tri-Band 900/1800/1900MHz
- VoIP – according to SIP (v.2.0), IAX (v.2.0), SSL (Slican Smart Link),
- Up0 – terminals for digital system phones,
ξ
Interfaces:
- LAN, WAN – Ethernet 10/100 Mbps,
- USB 2.0,
ξ
support of Slican doorphones and Slican DPH access control system,
ξ
power supply from alternating current network ~230V, 50Hz,
ξ
maximal power consumption 65W,
ξ
protection of cards against over voltage in the telecommunications network,
Issue 1.01 5
To Next Page
Loading...