Slican IPM-032 - Slican IPM-032 Server Architecture; General; Marking of Servers and Shelves of IPM-032 System

Slican IPM-032
2 Slican IPM-032 server architecture
2.1 General
Slican IPM-032 telecommunication server with a single processing unit. Three controller versions are
available:
″
IPM1APU – Alone Processor Unit,
″
IPM1LPU – LowCost Processor Unit, i.e. 4 VoIP channels, no support for batteries, no cards
IPM1E1, IPM32VoIP and submodules SM.DSP-2V as well as SM.DSP-AM,
″
IPM1DPU
2
– Distant Processing Unit;
2.2 Marking of servers and shelves of IPM-032 system
IPM-032 server has a modular construction. Different versions available within the basic version. All
versions include:
″
housing (two models)
″
main board (two models)
″
power (two models)
″
controller (three models)
The index of the specific product is made up of the of the variants listed above:
IPM-032.ab.c
where:
″
IPM-032 – product family;
″
a – single letter:
″
A – (Alone) single unit server;
″
L – (LowCost) single unit server with limited capability;
″
b – number of slots x maximum number of ports:
″
6x4 – six slots with 4 ports each (max. capacity 6*4 = 24);
″
8x4 – eight slots with 4 ports each (max. capacity 8*4 = 32);
″
c – type of housing (installation):
″
WM – wall-mounted housing;
″
2U – cabinet or euro rack mounted (19'');
2 planned
Issue 1.01 7