SMART 330 - Mixed Reality Cube; NTSC;PAL Switch; Power Supply; Side Connection Panel

Side connection panel
The side connection panel has a security lock slot, an SD or SDHC memory card slot, a USB-A
connector, a switch for selecting VGA DVI-D or composite video output, and a switch to select either
SXGA, WXGA, 720p or XGA resolution.
NTSC/PAL switch
The NTSC/PAL switch is on the bottom of your document camera. This switch enables you to
change the format of composite video output for your television. See Switching between NTSC and
PAL on page 14.
Mixed reality cube
With a mixed reality cube, you can interact with 3D models in SMARTNotebook
software using Mixed Reality Tools. See Using Mixed Reality Tools for the
SMARTDocumentCamera on page 49.
Power supply
Your document camera comes with a power supply and a country-specific
power cable.
USB cable
Use the USB cable to connect your document camera to your computer. You can
display objects, capture images to SMARTNotebook files and control your
document camera from SMARTNotebook software.
C H A P T E R 1
Overview
5