SMART 330 - Connecting Your Document Camera and Computer to Different Displays; Connecting Your Document Camera and Computer to a Shared Display

Connecting your document camera and computer to different displays
In this configuration your document camera images appear on one display, and your computer’s
desktop appears on the other display. You can also access document camera images through
SMARTNotebook software on your computer.
g To connect your document camera and computer to different displays
1. Complete the basic connection steps (see page 9).
2. Connect your computer or laptop to the projector of an interactive display.
N  N O T E
This is the normal configuration for using interactive whiteboards.
3. Connect your document camera to another external display (see page 13).
Connecting your document camera and computer to a shared display
In this configuration your document camera is connected to your computer with both a USB and a
VGA cable. Your document camera is connected to an external display.
g To connect your document camera and computer to a shared display
1. Complete the basic connection steps (see page 9).
2. Connect your computer’s VGA Out port to your document camera’s VGA In port with a VGA
cable.
3. Connect your document camera to an external display with a VGA cable (see page 13).
N  N O T E
DVI-D or composite video displays will not display your computer view. A VGA display is
required.
This configuration makes it easy to transition from Computer view to Camera view or SD Card
view using the same projector or display for all three views.
C H A P T E R 2
Setting up your SMARTDocumentCamera
12