SMART 330 - Using Image Masks; Using the Scroll Feature

Using image masks
Image masks obscure most of the image. You can resize or move the mask to reveal more of the
image.
N  N O T E
The image mask feature is for display purposes only. If you capture an image while the imagemask
is on, the image doesn’t include the image mask.
g To use an image mask
1. Display an object in Camera view, and then press Menu on the control panel.
The on-screen display menu appears.
2.
Press the up and down arrow buttons to select Special Tools , and then press Enter .
3. Press the up and down arrow buttons to select Mask on, and then press Enter .
An image mask appears on the image.
g To move the image mask
Press the up, down, right and left arrow buttons to move the mask area.
g To change image mask transparency
1. Press Menu.
The on-screen display menu appears.
2.
Press the up and down arrow buttons to select Special Tools , and then press Enter .
3. Press the up and down arrow buttons to select Image Mask Transparency, and then press
Enter .
4. Press the up and down arrows to select Adjust transparency.
5. Press Enter to save your settings.
g To turn off an image mask
Press Enter .
Using the scroll feature
The scroll feature zooms in on the image and allows you to move the zoomed area with the arrow
buttons.
C H A P T E R 5
Using your SMARTDocumentCamera in Camera view
34