SMART 330 - Page 39

g To use the highlight feature
1. Display an object in Camera view, and then press Menu on the control panel.
The on-screen display menu appears.
2.
Press the up and down arrow buttons to select Special Tools , and then press Enter .
3. Use the up and down arrow buttons to select Highlight > Highlight On, and then press Enter
.
Your document camera highlights a square in the center of the image and obscures the edges
of the image.
g To move the highlight square
Use the up, down, right and left arrow buttons to move the highlight square.
g To change highlight transparency
1. Press Menu.
The on-screen display menu appears.
2.
Press the up and down arrow buttons to select Special Tools , and then press Enter .
3. Press the up and down arrow buttons to select Highlight On, and then press Enter .
4. Press the up and down arrows to select Highlight transparency.
5. Press Enter to save your settings.
g To change the highlight area size
1. Press the Menu button on the control panel.
The on-screen display menu appears.
2.
Press the up and down arrow buttons to select Special Tools , and then press Enter .
3. Press the up and down arrow buttons to select Highlight, and then press Enter .
4. Select Adjust size, and then press Enter .
5. Press the up, down, left and right arrow buttons to change the highlight area size.
6. Press Enter to save your settings.
g To turn off the highlight feature
Press Enter .
C H A P T E R 5
Using your SMARTDocumentCamera in Camera view
33