SMART 330 - Downloading Software; Setting Output Resolution

g To switch between NTSC and PAL
Switch the NTSC/PAL switch on the bottom of your document camera to NTSC if your television
uses NTSC encoding, or to PAL if your television uses PAL encoding.
Setting output resolution
You can set your document camera’s output resolution to match the projector or display you’re using.
g To set the output resolution
Set the SXGA/WXGA/720p/XGA switch to match the resolution of your display. Refer to the chart
below to determine the output resolution you need.
Setting Resolution
SXGA 1280 × 1024
WXGA 1280 × 800
720p 1280 × 720
XGA 1024 × 768
Downloading software
Your document camera includes software downloads that you can use to create more effective
presentations.
g To install SMARTNotebook software and SMARTProductDrivers
1. Go to smarttech.com/software.
2. Scroll to SMARTNotebook collaborative learning software.
3. Under Choose a version, select the latest version of SMARTNotebook software for Windows
or Mac, and then follow the on-screen instructions.
g To download and install Image Mate software
1. Visit the SMART download page at smarttech.com/software.
2. Scroll to Image Mate software for SMARTDocumentCameras.
3. Under Choose a version, select Image Mate 2.0 software for SMART Document Camera
330, and then follow the on-screen instructions.
C H A P T E R 2
Setting up your SMARTDocumentCamera
15