SMART 330 - Displaying Printed Documents

Displaying printed documents
When you set your document camera to Computer view or Camera view, you can display printed
documents, use the anti-glare sheet to reduce glare, optimize the image for text documents with Text
modes and optimize the image for documents with graphics with Graphics modes.
g To display printed documents
1. Place your documents on the table.
2. Adjust the document camera and aim its lens at your documents.
3. Rotate the zoom dial to adjust the zoom magnification.
4.
Press the Auto Focus button to adjust the focus.
g To reduce glare with the anti-glare sheet
If glare makes it difficult for you to read printed documents that you’re displaying, place the anti-glare
sheet on top of the printed materials.
g To optimize the image for text documents
1. When your document camera is in Camera view, press Menu on the control panel.
The on-screen display menu appears.
2. Select Image Setting, and then press Enter .
3. Select Image mode, and then press Enter .
4. Select either Text 1, Text 2 or Text 3, and then press Enter . See Camera view Image
Settings on-screen display menu on page 30 for an explanation of the settings.
g To optimize the image for documents with graphics
1. When your document camera is in Camera view, press Menu on the control panel.
The on-screen display menu appears.
2. Select Image Setting, and then press Enter .
3. Select Image mode, and then press Enter .
4. Select either Graphics 1 or Graphics 2, and then press Enter . See Camera view Image
Settings on-screen display menu on page 30 for an explanation of the settings.
C H A P T E R 3
Using your SMARTDocumentCamera
21