SMART 330 - Using Your Document Camera with SMART Notebook Software; Inserting and Removing a Memory Card

Inserting and removing a memory card
Your document camera has a memory card slot, enabling you to save document camera images
(when your document camera is in Computer view or Camera view) or to display previously captured
images (when your document camera is in SD Card view).
C  C A U T I O N
Avoid static electricity near a memory card because it can damage the card.
g To insert a memory card
1.
Press the Camera view button on the control panel.
2. Insert a memory card into the card slot on the side panel.
I  I M P O R T A N T
o
Set your document camera to Application mode (see Setting USB-B Application mode
on page 37) if you want to capture images to the memory card.
o
Ensure the label on the memory card is facing up.
g To remove a memory card
1.
Press the Camera view button on the control panel and wait until your document camera
displays a live image.
2. Push in the memory card to eject it, and then remove the card.
C  C A U T I O N
To prevent memory card damage, do not remove the memory card while capturing or deleting
images.
Using your document camera with
SMARTNotebook software
Your SMARTDocumentCamera integrates with SMARTNotebook software, enabling you to control
your document camera from your computer or from a SMARTBoard interactive whiteboard or display.
You can display objects, capture an image and your annotations on an image to a SMARTNotebook
page, zoom, focus and adjust brightness settings.
C H A P T E R 3
Using your SMARTDocumentCamera
22