SMART 330 - Setting Document Camera Views

1. Only when USB-B mode is set to SD Storage. See Setting USB-B SD Storage mode on page
38.
2. Only when USB-B mode is set to Application. See Setting USB-B Application mode on page
37.
The following table describes outputs when your document camera is connected to a display with
VGA DVI-D or Composite Video Out:
Feature description Computer
view
Camera
view
SD Card
view
Connect to projector or display (VGA Out) VGA In Camera
image
Memory card
images
Connect to high-definition projector or display (DVI-D
Out)
Camera
image
Camera
image
Memory card
images
Connect to television (Composite Video Out) N/A Camera
image
Memory card
images
Setting document camera views
g To set Computer view
Press the Computer view button on the control panel. For more information, see page 25.
g To set Camera view
Press the Camera view button on the control panel. For more information, see page 28.
g To set SD Card view
Press the SD Card view button on the control panel. For more information, see Setting your
document camera to SD Card view on page 41.
C H A P T E R 3
Using your SMARTDocumentCamera
19