I I M P O R T A N T
Your document camera must be in Camera view to set it to Application mode. It cannot be in
Computer view or SD Card view.
g To set your document camera to Application mode
1. Connect your document camera to a projector or flat-panel display with the VGA cable (see
page 13).
2. Turn on your computer, and set it to Camera view.
3. Press Menu on the control panel.
The on-screen display menu appears.
4. Press the up and down arrow buttons on the control panel to select Function Setting, and then
press Enter .
5. Select USB-B mode, and then press Enter .
6. Select Application and then press Enter .
Setting USB-B SD Storage mode
This mode enables you to see the contents of your memory card from your computer.
g To set SD Storage mode
1. Connect your document camera to a projector, flat-panel display or television (see page 13).
2. Press Menu on the control panel.
The on-screen display menu appears.
3. Press the up and down arrow buttons on the control panel to select Function Setting, and then
press Enter .
4. Select USB-B mode, and then press Enter
5. Select SD Storage and then press Enter .
C H A P T E R 5
Using your SMARTDocumentCamera in Camera view
38
To Next Page
Loading...
