SMART 330 - Pausing, Playing and Restarting Animation; Adding Labels

g To rotate a 3D model along multiple axes
1. Select the 3D model.
2. Press the center rotation handle.
3. Drag your finger in the direction you want to rotate the 3D model, and then release your finger
when done.
g To set a 3D model to its original rotation
1. Select the 3D model.
2. Press the 3D model’s menu arrow, and then select Reset Rotation.
Pausing, playing and restarting animation
If a 3D model contains animation, you can pause, resume and restart the animation.
N  N O T E
If a 3D model doesn’t contain animation, the Animation menu documented in the following
procedures is disabled.
g To pause animation
1. Select the 3D model.
2. Press the 3D model’s menu arrow, and then select Animation > Play/Pause Animation.
g To resume playing animation
1. Select the 3D model.
2. Press the 3D model’s menu arrow, and then select Animation > Play/Pause Animation.
g To restart animation
1. Select the 3D model.
2. Press the 3D model’s menu arrow, and then select Animation > Restart Animation.
Adding labels
You can use labels to highlight different components of a 3D model. Labels can be text, or shapes or
other 2D objects.
C H A P T E R 7
Using Mixed Reality Tools for the SMARTDocumentCamera
56