SMART 330 - Setting Camera View

l Use Microscope mode to use your document camera with a standard microscope eyepiece
without additional adapters
Setting Camera view
Switch your document camera to Camera view to display images on a projector, flat-panel display or
television.
I  I M P O R T A N T
Your document camera must be connected directly to an external display. See Connecting your
document camera to an external display on page 13.
g To switch to Camera view
1. Connect your document camera to a projector or flat-panel display with the appropriate cable
(see Connecting your document camera to an external display on page 13).
2.
Press the Camera view button on the control panel.
g To display objects
1.
Press the Power button on the control panel.
2.
Press the Camera view button on the control panel.
3. Place the object you want to display under the camera.
4. Rotate the camera head to aim the lens at your subject.
g To adjust the zoom magnification
Rotate the zoom dial on the camera head to increase or decrease the zoom magnification.
g To automatically adjust the focus
Press the Auto Focus button on the camera head to automatically focus the image.
g To adjust brightness settings
Press the Brighten or the Darken button on the control panel.
C H A P T E R 5
Using your SMARTDocumentCamera in Camera view
28