I I M P O R T A N T
l Your document camera must be set to Application mode. See Setting USB-B Application
mode on page 37.
l You are unable to delete images from your computer, only from the document camera’s
memory card.
g To delete images
1.
Press the SD Card view button on the control panel.
You see the current saved image from the memory card.
2. Use the left and right arrow buttons on the control panel to select the image you want to delete.
3. Press Menu on the control panel.
The on-screen display menu appears.
4. Select SD, and then press Enter .
5. Select Delete, and then press Enter .
6. Select Current, and then press Enter to delete the current image.
OR
Select All, and then press Enter to delete all images in the viewed folder.
The deleting image icon displays briefly while your document camera deletes images.
Locking and unlocking images
You can lock images to include them in slideshows set to Select > Lock in the Slideshow menu.
I I M P O R T A N T
If you are unable to access the SD Menu, you must set your document camera’s USB-B mode to
Application. This is a Camera view menu setting. See Setting USB-B Application mode on page 37.
g To lock images for a slideshow
1.
Press the SD Card view button on the control panel.
2. Use the arrow buttons on the control panel to select the image you want to lock, and then press
the Menu button.
The on-screen display menu appears.
C H A P T E R 6
Using your SMARTDocumentCamera in SD Card view
44
To Next Page
Loading...
