SMART 330 - Camera View Special Tools On-Screen Display Menu; Using the Highlight Feature

1. Visible only when Brightness is set to Auto
2. Visible only when White Balance is set to Manual
3. Visible only when Image mode is set to Graphics 1
Camera view Special Tools on-screen display menu
g To access the Special Tools menu
Select Camera view > Menu > Special Tools .
Special Tools menu options Description
Highlight
l
Highlight On
l
Adjust Transparency
l
Adjust Size
Highlights a center square on the displayed image
Mask
l
Mask On
l
Adjust Transparency
Covers the displayed image with an adjustable screen mask
Scroll
l
Scroll on
l
×2
l
×3
l
×4
Zooms in on the displayed images and enables you to move the
zoomed area with the up, down, left and right arrow buttons on
the control panel
PiP
Takes a picture, and then displays that picture in a corner of the
screen while you move or zoom the camera
Using the highlight feature
When you use the highlight feature, a square in the center of the displayed image highlights your
subject. You can change the size, transparency and position of the highlight square.
N  N O T E
The highlight feature is for display purposes only. If you capture an image while the highlight square
is on, the image doesn’t include the highlight.
C H A P T E R 5
Using your SMARTDocumentCamera in Camera view
32