SMART 330 - Using the Picture in Picture (Pip) Feature

N  N O T E
The scroll feature is for display purposes only. If you capture an image while the scroll is on, the
captured image is the unscrolled image.
g To display the scroll feature
1. Display an object in Camera view, and then press Menu on the control panel.
The on-screen display menu appears.
2. Press the up and down arrow buttons to select Special Tools, and then press Enter .
3. Press the up and down arrow buttons to select Scroll, and then press Enter .
4. Press the up and down arrow buttons to select Scroll On, and then press Enter .
Your document camera displays a zoomed area of the image.
g To move the zoomed scroll area
Use the up, down, right and left arrows to move the zoomed scroll area.
g To change the scroll area magnification
When setting the scroll feature, select either ×2, ×3 or ×4, and then press Enter .
Using the Picture in Picture (PiP) feature
The Picture in Picture (PiP) feature captures a temporary image from your document camera, and
then displays it in one corner of the display. You can then change what is under the camera without
the temporary image changing.
N  N O T E
The PiP feature is for display purposes only. If you capture an image while the PiP is on, the image
doesn’t include the PiP.
g To display the PiP image
1. Display an object in Camera view, and then press Menu on the control panel.
The on-screen display menu appears.
2. Press the up and down arrow buttons to select Special Tools, and then press Enter .
3. Press the up and down arrow buttons to select PiP, and then press Enter .
Your document camera displays a picture in picture image.
C H A P T E R 5
Using your SMARTDocumentCamera in Camera view
35